| 1. | The optimal program execution time with rejuvenation
的程序执行时间优化算法 |
| 2. | Constrain qualifications about multiobject optimal programming
多目标最优化问题的约束品性 |
| 3. | The transmission system of film face - lifting equipment is optimized by programming optimal program , reliability of transmission system is enhanced
采用了计算机fortran编程语言，对小油封整容器的传动系统进行了优化设计，使其传动可靠性得到了较好的保障。 |
| 4. | Application on a program based on the language b6 . 0 , the optimal program of seal ' s structural parameters is designed , according to the results running , the most optimal value of seal ' s structural parameters is got
对螺旋密封结构参数进行了优化设计，并应用vb6 . 0语言进行编程，得出了密封的螺旋结构参数的优化值。 |
| 5. | By comparing the results of the evaluation of the options , it showed each program the fit and unfit quality and determined the optimal program for residential district environment design program of the tender to provide the basis
比较各方案的评价结果即可看出每个方案的优劣并确定最优方案，从而为住宅小区环境设计方案的招标工作提供依据。 |
| 6. | The application of advantages and mechanic properties of the special - shaped columns and short - shear walls in small high buildings are expatiated , and three structural forms are analyzed and discussed with a real project for example for the purpose of selecting an optimal program
摘要阐述了异形柱框架短肢剪力墙结构在小高层住宅中的应用优势和受力特点，结合工程设计实例，采用3种结构形式分别进行计算分析，以寻找最优方案。 |
| 7. | Because the microscopic model needs the distinct structure relation , the numerous input data and the long time of computing , the macroscopic model was used . after analyzing methods for the nodal pressure , the corresponding optimal program was drawn up
由于微观模型要求拓朴结构关系清楚，所需输入数据多，计算耗时长，所以根据实际情况建立了管网的宏观模型，针对宏观模型的特点，分析了测压点数目和位置的确定方法，进而编制了计算机优化程序。 |
| 8. | Our target and mission : protect personnel to provide valuable diagnostic basis for patient and cure , and a variety of disease information compositive rise , to manage a heart the doctor of the disease understands better and the progress of control treatment and effect offer optimal program
我们的目标和使命：为病人和医护人员提供有价值的诊断依据，并将多种疾病信息集成起来，为管理心脏疾病的医生更好地了解并控制治疗的进展和效果提供最佳方案。 |
| 9. | The joint motion of robot has been optimized by following methods : pseudoinverse solution , initial joint configuration selecting , self - motion planning , and combination of both the initial joint configuration planning and the self - motion planning . compared with the planar 3r robot which has one - degree of redundancy , the optimal programming of the planar 4r robot which has two - degree of redundancy is carried out
采用最小范数规划法、初始位形规划法、自运动规划法、初始位形和自运动同时规划法，分别对具有一个冗余度的平面三柔性臂机器人和具有两个冗余度的平面四柔性臂机器人进行规划。 |
| 10. | Abstract : in this paper , the characteristics of production system have been analyzed and the production economic functions have been set up in mine . the matrix of two - dimension alternately action is analyzed for mining process and factor in open - pit mine . it is made algorithm for matrix of two - dimension alternately action . under the conditions of binding , mine system is optimum running by optimal program , optimal coordination and optimal control
文摘:分析了矿山生产系统的特点，建立了矿山生产经济函数，对露天矿生产工艺、生产因素进行了二元交互作用矩阵分析，提出了求解二元交互作用矩阵的算法，通过最优计划、最优协调、最优控制使矿山生产系统在一定约束条件下最佳运转。 |
